The stainless steel sink in the kitchen is the most important tool for washing work in the kitchen, but now the sinks on the market are uneven, and in order to buy a high-quality sink, you must master some methods and skills to judge the sink
Identification methods of kitchen stainless steel sinks:
1. Look at the material of the stainless steel sink:
The material of stainless steel sink is mainly divided into two types, 201# and 304#. The stainless steel sink made of 304# material is better, it is not easy to rust, and the carbon content is low, and the flexibility and good of steel.
2. Look at the flatness of the sink surface:
First of all, you can see whether the surface of the sink is flat, keep the line of sight and the sink at the same level, the sink should not be concave and protruding, and the edge of the sink is not warped, because the sink has warping will affect the installation of the sink, and it is easy to hide dirt during use.
3. Look at the production process of the sink:
At present, the production process of sink is divided into two types, one is welding and the other is integrated molding. Welding sink on the process requirements are also relatively high, because to be tight, no virtual welding is good, if not welded well, use for a long time, sink welding is easy to rust and stain, affect the cabinet beauty and affect the service life of the sink. The process of one-piece sink is more difficult, but it is much better than welding in all aspects.
4. Look at the thickness of the sink material:
The thickness of the sink is 0.8-1.0mm is better, this thickness can achieve a combination of strong and weak elasticity, too thin or too thick is not good.
5. Look at the depth of the sink:
The depth of the stainless steel sink in the kitchen is between 180-220mm, too shallow water will splash clothes in use, too deep to continue to bend over will be more tired.