Kitchen stainless steel sink has right angles and rounded corners, everyone in the purchase of kitchen stainless steel manual sink may not notice, its four corners are right angles or rounded corners, but more to see whether the appearance of the sink is beautiful, and did not consider the difference between the two. In fact, the right angle and rounded corner here refer to the welding of the four sides of the inside of the basin, not the corner treatment of the sink.
The advantages of the stainless steel sink in the right-angle kitchen: The advantage of the right-angle sink is that the process is relatively simple, and the finished product looks angular, making people feel relatively high-end.
The disadvantage of the right-angle stainless steel manual sink is: because the four sides of the weld of the pelvis are at a right angle of 90 degrees, it is difficult to clean in place when cleaning. Therefore, it is easy to collect dirt after a long time, and it is very difficult to clean. In particular, some oil stains are attached to the weld, which is easy to yellow, corrode the welding circuit, and cause the weld to rust after a long time. At that time, unless a special solder path brightener is used to clean the solder circuit, it is difficult to eliminate.
Rounded kitchen stainless steel sink advantages:
Rounded stainless steel sink is actually to cater to the public's practical effect in the right angle manual sink upgrade, rounded corner sink inherits the advantages of angular, high-end atmosphere, but also perfectly solves the problem of dirt and dirt, not easy to clean. Therefore, when you buy a stainless steel sink in the kitchen, pay attention to whether the inner corner of the sink is right or rounded, and the right angle sink is cheaper because the process is less. But the effect is definitely that the rounded handmade sink is better to use.